How To Clean Mixer Grinder

Mixer grinder are the workhorse of any kitchen. They are the perfect size for small batches of dough, and they can easily handle a variety of ingredients. But like any machine, they need to be cleaned properly to keep them running smoothly. Here are five tips for cleaning your mixer grinder:

Mixer Grinder Deep Cleaning | Kitchen Cleaning Tips

Cleaning Your Mixer Grinder

Mixer grinders are one of those appliances that can be really messy and difficult to clean. However, with the right cleaning tools and techniques, it’s easy to get your mixer grinder looking and functioning like new.

Before you start cleaning your mixer grinder, it’s important to gather all of the necessary materials. This include a bucket, a cloth, some soap, a brush, and a towel.

To start, wet the cloth and dip it into the bucket. Soap the cloth and use the brush to scrub the mixer grinder’s blades and shaft. Finally, dry the mixer grinder with the towel.

If the mixer grinder has a removable parts, like the blades, be sure to clean them before you put them back in. Otherwise, the blades will quickly become encrusted with food and debris.

Now that your mixer grinder is clean, it’s ready to use!

Step Disassemble the Mixer Grinder

1. Remove the mixer blade

  1. Remove the screws that hold the top and bottom sections of the mixer grinder together
  2. Lift off the top and bottom sections
  3. Remove the metal shaft that runs through the center of the mixer grinder
  4. Remove the metal gear case
  5. Remove the bearings and belts
  6. Wash the mixer grinder parts in hot, soapy water
  7. Dry the parts completely
  8. Replace the bearings and belts
    10. Reattach the top and bottom sections

    1. Clean the metal shaft that runs through the center of the mixer grinder with a metal brush.

    2. Clean the metal gear case with a cloth and a degreaser.

    3. Clean the mixer blade with a cloth and a degreaser.

    4. Check the alignment of the metal shaft and gears.

    5. Replace the bearings and belts if needed.

    6. Reattach the top and bottom sections.

Also Check   12 Best Mixer Grinder Under 5000 in India 2023

Step Clean the Blades

If the mixer grinder has removable blades, make sure to clean them after each use. Use a soft, damp cloth to clean the blades, being sure to hold the cloth against the blade tightly so as not to damage it. Be sure to use a mild detergent, and rinse the blades off with warm water.

Step Clean the Jar and Lid

The first step in cleaning the mixer grinder is to clean the jar and lid. First, wash the jar and lid in warm, soapy water. Make sure to scrub any built-up food particles off of the jar and lid. Next, rinse the jar and lid well in cool, clean water. Let the jar and lid dry completely before using them again.

Step Wipe Down the Base

Before you do anything else, it’s important to clean the mixer grinder’s base. This will help prevent build-up and improve the overall performance of the machine.

To clean the base, use a damp cloth or spatula to wipe it down. Make sure to get into all the nooks and crannies. If there is any debris or dirt stuck on the blades, use a clean, dry cloth to remove it.

Also Check   500 watts vs. 750 watts vs. 1000 watts Mixer Grinder?

Once the base is clean, turn the mixer grinder off and unplug it. Next, remove the blade guard by unscrewing it from the base. Finally, remove the blade by unscrewing it from the guard. Make sure to wipe down the blade and guard with a clean cloth before putting them back in place.

Step Reassemble the Mixer Grinder

1.Start by removing the hopper and auger from the mixer grinder.

2.Remove the blade that spins the auger and the blade that spins the flour.

3.Clean the two blades with a cloth and some soap.

4.Rinse the auger and flour blades with water.

5.Stick the auger blade back onto the auger and screw the flour blade back onto the mixer grinder.

6.Put the hopper back onto the mixer grinder.

7.Push the mixer grinder back together and make sure the blades are spinning evenly.

8.You’re ready to use your mixer grinder!

Cleaning Your Mixer Grinder Blades

There are a few key steps to taking care of your mixer grinder blades. First, always use a clean cutting surface when grinding. This means keeping your work area clean and free of debris. Second, always use the correct grinding technique for the food you are processing. Too much pressure can damage your blades, while too little pressure can cause them to skip or jam. Finally, be sure to clean your blades after each use with a gentle detergent and warm water.

Step Remove the Blades

The first step to cleaning a mixer grinder is to remove the blades. Most mixers have removable blades that can be washed in the dishwasher. To clean the blade, place it in a pot of hot water and soap and scrub it clean. Rinse it off and let it air dry.

Also Check   10 Best Selling Preethi Mixer Grinder in India 2023

Step Soak the Blades in Hot Water

After removing the blade from the mixer grinder, soak the blade in hot water for a few minutes so that the blade is completely wet. This will help loosen any residual dirt or food particles that may be on the blade.

Using a cloth or a brush, scrub the blade clean. Make sure to get into the nooks and crannies of the blade. Finally, dry the blade off using a cloth.

Step Use a Brush to Clean the Blades

The first step to cleaning your mixer grinder is to use a brush to clean the blades. This is a very important step because it will remove any debris that may be on the blades, which would otherwise cause the grinder to not operate properly.

Step Rinse the Blades

It is important to take the time to wash the blades and roller grinder before and after each use. This will help to keep the machine clean and running smoothly.

1. Fill a large bowl with warm water and add a teaspoon of dish soap.

  1. Place the blades and roller grinder in the bowl and turn it on to its highest speed.
  2. Use your hands to scrub the blades and roller grinder clean.
  3. Rinse the blades and roller grinder thoroughly in the bowl of water.
  4. Allow the blades and roller grinder to dry before using.

Step Dry the Blades

If your mixer grinder has removable blades, make sure to dry them off after use. This will help to avoid any rusting or corrosion. Simply blow dry the blades for a short time or use a hairdryer on low heat. Be careful not to overheat the blades or they will fade.

Conclusion

Mixer grinders are often the first piece of equipment to become dirty. Follow these simple steps to keep your mixer grinder clean and running smoothly.